Panasonic PT-RCQ80LBE 2715x1697 8000 Lumens 20000 Hrs 1-Chip Laser Projector w/o Lens Black
Panasonic PT-RCQ80LBE 2715x1697 8000 Lumens 20000 Hrs 1-Chip Laser Projector w/o Lens Black
Panasonic - Delivery lead time Luzon 3-5 working days, VIS/MIN 5-7 working days. Availability of stock subject to change without prior notice.
無法載入取貨服務供應情況
|
Projector type |
1-Chip DLP Laser |
|
|
Power |
AC 100–240 V, 50/60 Hz |
|
|
Power consumption*1 |
880 W |
|
|
Lens |
Optional powered zoom/focus lenses |
|
|
Resolution |
4,608,000 pixels / 2715 x 1697 dots |
|
|
Center-to-Corner Uniformity*3 |
90% |
|
|
DLP™ Chip |
|
|
|
Panel Size |
17.0 mm (0.67 in) diagonal, 16:10 aspect ratio |
|
|
Display Method |
DLP™ chip x 1, DLP™ system |
|
|
Pixels |
2,304,000 (1920 x 1200) pixels |
|
|
CONTRAST |
10,000:1 (Full On/Full Off) * With [Dynamic Contrast] set to [3]. |
|
|
Screen size (diagonal) |
1.27–15.24 m (50–600 in), 1.27–5.08 m (50–200 in) with ET-DLE055, 2.54–8.89 m (100–350 in) with ET-DLE035, 16:10 aspect ratio |
|
|
Lens Shift |
|
|
|
Vertical |
+50 %, -16 % (+40%, -16% with ET-DLE060) (powered) | |
|
Horizontal |
+30 %, -10 % (+19%, -10% with ET-DLE060 / +28 %, -10 % with ET-DLE085/ET-DLE105 ) (powered) | |
|
Keystone correction range |
Vertical: ±40 ° (±5 ° with ET-DLE020, ±16 ° with ET-DLE060, ±22 ° with ET-DLE105/ET-DLE085/ET-DLE055, +5 ° with ET-DLE035), Horizontal: ±15 ° (±10 ° with ET-DLE060) (cannot be operated with ET-DLE035/ET-DLE020) |
|
| Installation | Ceiling/floor, front/rear, free 360-degree installation | |
| Operating noise*1 | 40 dB (Normal)/38 dB (Quiet) | |
| Light source | Laser diode | |
| Light Output | 8,000 lm*1 / 8,400 lm (Center)*2 | |
| Time until light output declines to 50 %*3 | 20,000 hours (NORMAL)/24,000 hours (ECO) | |
| Cabinet Materials | Molded plastic | |
| Dimensions (WxHxD) | 498 x 200*6 x 538 mm (19 19/32˝ x 7 7/8˝ *6 x 21 3/16˝ ) (without lens) | |
| Operating Environment | Operating temperature: 0 °C- 45 °C (32 °F -113 °F)*7, operating humidity: 20 %-80 % (no condensation) | |
| Applicable software | Logo Transfer Software, Multi Monitoring & Control Software, Early Warning Software, Geometry Manager Pro (ET-UK20 Upgrade Kit, ET-CUK10 Auto Screen Adjustment Kit), Smart Projector Control for iOS/Android™ | |
| Terminal | ||
| SDI IN | BNC x 1: 3G/HD-SDI input | |
| HDMI In | HDMI 19-pin x 1 (Compatible with HDCP 2.2, Deep Color, 4K signal input) | |
| DVI-D In | DVI-D 24-pin x 1 (DVI 1.0 compliant, compatible with HDCP, compatible with single link only) | |
| MULTI PROJECTOR SYNC IN | BNC x 1 | |
| MULTI PROJECTOR SYNC OUT | BNC x 1 | |
| Serial In | D-sub 9-pin (female) x 1 for external control (RS-232C compliant) | |
| Serial Out | D-sub 9-pin (male) x 1 for link control | |
| Remoter 1 In | M3 jack x 1 for wired remote control | |
| Remoter 1 Out | M3 jack x 1 for link control (for wired remote control) | |
| Remoter 2 In | D-sub 9-pin (female) x1 for external control (parallel) | |
| LAN | RJ-45 x 1 for network connection, 10Base-T, 100Base-TX (Compatible with PJLink™ [Class 2], Art-Net) | |
| DIGITAL LINK | RJ-45 x 1 for network and DIGITAL LINK connection (HDBaseT™ compliant), 100Base-TX (Compatible with PJLink™ [Class 2], Art-Net, HDCP 2.2, Deep Color, 4K signal input) | |
| USB | USB Connector (Type A) x 1 for Cloning/Wireless Module (output 5 V/500 mA) | |
| Expansion Slot | Open slot for SLOT NX compatible interface board | |
Share
