Panasonic PT-RQ22KE 20000 Lumens SSI 20000 Hrs Laser Projector without lens

Projector type

3-Chip DLP™ projector

Power supply

AC 200 V–240 V, 8.5 A, 50/60 Hz
(Light output will decrease to approximately 50 % when using the projector with AC 100 V to AC 120 V [9.8A])

Power consumption

1,650 W (0.3 W with Standby Mode set to ECO^*6, 4 W with Standby Mode set to NORMAL)

DLP™ chip

Panel size

22.9 mm (0.9 in) diagonal (16:10 aspect ratio)

Display method

DLP™ chip x 3

Pixels

4,096,000 (2560 × 1600) × 3, total of 12,288,000 pixels,
49,152,000 (12,288,000 x 4) pixels when Quad Pixel Drive set to ON

Refresh rate

240 Hz^*1

Lens

Optional (no lens included with this model)

Light source

Laser Diode

Light output

20,000 lm^*2 / 21,000 lm (Center)^*3

Screen size (diagonal)

1.78–25.4 m (70–1,000 in) with 16:10 aspect ratio
1.78–15.24 m (70–600 in) with the ET-D75LE8 / ET-D3LET80, 16:10 aspect ratio
3.05–15.24 m (120–600 in) with the ET-D75LE95, 16:10 aspect ratio

Brightness

21,000 lm (Center) / 20,000 lm

Center-to-corner uniformity

90 %

Contrast

20,000:1 (Full On/Full Off, Dynamic Contrast Mode: 3)

Resolution

4K⁺ (5120 x 3200 pixels) (Quad Pixel Drive: ON)

Horizontal

±29 % (±19 % with ET-D75LE6 / ET-D3LEW60, ±21 % with ET-D75LE95) (powered)

Keystone correction range

Vertical: ±40° (± 22° with ET-D3LEW50, ±28° with ET-D75LE6 / ET-D3LEW60, +5° with ET-D75LE95),
Horizontal: ±15° (0° with ET-D75LE95)

Keystone correction range with optional Upgrade Kit ET-UK20

Vertical: ±45° (± 40° with ET-D75LE10 / ET-D3LEW10, ET-D75LE20 / ET-D3LES20, ±22° with ET-D3LEW50,
±28° with ET-D75LE6 / ET-D3LEW60, +5° with ET-D75LE95)
Horizontal: ±40° (±15° with ET-D3LEW50, ET-D75LE6 / ET-D3LEW60, 0° with ET-D75LE95),
When [VERTICAL KEYSTONE] and [HORIZONTAL KEYSTONE] are used simultaneously, correction cannot be made exceeding total of 55°.

Installation

Horizontal/vertical, free 360-degree installation

Cabinet materials

Molded plastic

Dimensions (W x H x D)

600 mm x 307 mm^*7 x 745 mm ( 23 5/8˝ x 12 3/32˝ x 29 11/32˝ ) ( including protruding parts );
598 mm x 270 mm^*8 x 725 mm ( 23 17/32˝ x 10 5/8˝ x 28 17/32˝ ) ( not including protruding parts )

Operation noise^*4

46 dB

Operating environment

Operating temperature: 0–45 °C (32–113 °F)^*8,
operating humidity: 10–80 % (no condensation)

Applicable software

Logo Transfer Software, Multi Monitoring & Control Software, Early Warning Software, Geometry Manager Pro (ET-UK20 Upgrade Kit, ET-CUK10 Auto Screen Adjustment Kit), Smart Projector Control for iOS/Android™