Panasonic PT-RZ34KE 30000 Lumens WUXGA 20000 Hrs 3-Chip Laser Projector without lens
Panasonic PT-RZ34KE 30000 Lumens WUXGA 20000 Hrs 3-Chip Laser Projector without lens
Panasonic - Delivery lead time Luzon 3-5 working days, VIS/MIN 5-7 working days. Availability of stock subject to change without prior notice.
Couldn't load pickup availability
|
Projector type |
3-Chip DLP™ projector |
|||
|
Power supply |
AC 200 V–240 V (Light output will decrease when using the projector with AC 100 V to AC 120 V) |
|||
|
Power consumption |
2,450 W (Standby: 13 W) |
|||
|
DLP™ chip |
|
|||
|
Panel size |
24.4 mm (0.96 in) diagonal (16:10 aspect ratio) |
|||
|
Display method |
DLP™ chip x 3, DLP™ projection system |
|||
|
Pixels |
2,304,000 (1920 x 1200 pixels) x 3 |
|||
|
Lens |
Optional (no lens included with this model) |
|||
|
Light source |
Laser diodes (Blue LD, Red LD) |
|||
|
Light output |
30,500 lm*1/32,000 lm (Center)*2 |
|||
|
Screen size (diagonal) |
1.78–25.4 m (70–1,000 in), 1.78–15.24 m (70–600 in) with ET-D75LE8/ET-D3LET80, 3.05–15.24 m (120–600 in) with ET-D75LE95, 5.08–15.24 m (200–600 in) with ET-D3LEU100/ET-D3LEW200 |
|||
|
Brightness |
30,000 lm |
|||
|
Center-to-corner uniformity |
90 % |
|||
|
Contrast ratio*1 |
20,000:1 (Full On/Full Off, Dynamic Contrast Mode: 3) |
|||
| Time until light output declines to 50 %*3 | 20,000 hours (Normal) | |||
|
Resolution |
WUXGA (1920 x 1200 pixels) |
|||
| Lens shift*4 (From the origin point of the lens mounter) | ||||
| Vertical | ±55 % (+78 %, +68 % with ET-D75LE95, ±48 % with ET-D3LEW200, ±44 % with ET-D75LE6/ET-D3LEW60) (powered) | |||
|
Horizontal |
|
|||
|
Keystone correction range |
Vertical: ±45 ° (± 40 ° with ET-D75LE10/ET-D3LEW10/ET-D75LE20/ET-D3LES20, ±28 ° with ET-D75LE6/ET-D3LEW60, ±22 ° with ET-D3LEW50, ±15 ° with ET-D3LEW200, ±8 ° with ET-D3LEU100, +5 ° with ET-D75LE95), |
|||
|
Installation |
Ceiling/floor, front/rear, free 360-degree installation |
|||
|
Cabinet materials |
Molded plastic |
|||
|
Dimensions (W x H x D) |
Approx. 598 x 353 x 780 mm (23 17/32˝ x 13 29/32˝ x 30 23/32˝) (not including protruding parts) |
|||
|
Operation noise*1 |
49 dB (Normal), 46 dB (Quiet) |
|||
|
Operating environment |
Operating temperature: 0–45 °C (32–113 °F)*7, operating humidity: 10–80 % (no condensation) |
|||
|
Applicable software |
Logo Transfer Software, Multi Monitoring & Control Software, Early Warning Software, Smart Projector Control for iOS/Android™ |
|||
|
Terminal |
|
|||
|
SDI IN |
BNC x 1: 3G/HD-SDI input |
|||
|
HDMI IN |
HDMI x 1 (Deep Color, compatible with HDCP 2.2, 4K/60p signal input*5) |
|||
|
DVI-D IN |
DVI-D 24-pin x 1 (DVI 1.0 compliant, compatible with HDCP) (Single-link only) |
|||
|
MULTI PROJECTOR SYNC IN terminal/3D SYNC 1 IN/OUT terminal |
BNC x 1 |
|||
|
MULTI PROJECTOR SYNC OUT terminal/3D SYNC 2 OUT terminal (dual purpose) |
BNC x 1 |
|||
|
SERIAL IN |
D-sub 9-pin (female) x 1 for external control (RS-232C compliant) |
|||
|
SERIAL OUT |
D-sub 9-pin (male) x 1 for link control (RS-232C compliant) |
|||
|
REMOTE 1 IN |
M3 stereo mini-jack x 1 for wired remote control |
|||
|
REMOTE 1 OUT |
M3 stereo mini-jack x 1 for link control |
|||
|
REMOTE 2 IN |
D-sub 9-pin (female) x 1 for external control (parallel) |
|||
|
DIGITAL LINK |
RJ-45 x 1 for network and DIGITAL LINK connection (HDBaseT™ compliant), 100Base-TX, compatible with Art-Net, PJLink™ (Class 2), Deep Color, HDCP 2.2, 4K/60p signal input*5 |
|||
|
LAN |
RJ-45 x 1 for network connection, PJLink™ (Class 2) compatible, 10Base-T/100Base-TX, Art-Net compatible |
|||
|
USB |
USB connector (Type A) x 1 for optional Wireless Module (AJ-WM50 Series)/USB Memory Stick |
|||
|
DC OUT |
USB Type A x 2 (for power supply, DC 5 V total of 2 A) |
|||
|
Expansion slot |
SLOT (one terminal, vacant) for interface boards, SLOT NX compatible |
|||
Share
