Panasonic PT-MZ880B 1920x1200 8000 Lumens WUXGA 20000 Hrs Laser Projector Black
Panasonic PT-MZ880B 1920x1200 8000 Lumens WUXGA 20000 Hrs Laser Projector Black
This Product is Order Basis
Couldn't load pickup availability
|
Projector type |
LCD projectors |
|
|
Power supply |
AC 100–240 V, 50/60 Hz |
|
|
Power consumption |
490 W (5.4–2.6 A) (510 VA) (Power consumption is 465 W at 200–240 V) |
|
| Brightness*1 | 8,000 lm | |
|
DLP™ chip |
|
|
|
Panel size |
19.3 mm (0.76 inches) diagonal (16:10 aspect ratio) |
|
|
Display method |
Transparent LCD panel (x 3, R/G/B) |
|
| Drive Method | Active matrix method | |
|
Pixels |
2,304,000 ( Pixels 1920 x 1200) pixels x 3 |
|
|
Lens |
Powered zoom (throw ratio 1.61–2.76:1), powered focus F = 1.7–2.3, f = 26.8–45.5 mm (for supplied lens; optional lenses also available) |
|
|
Light source |
Laser diodes |
|
|
Resolution |
WUXGA (1920 x 1200 pixels) |
|
| CENTER-TO-CORNER ZONE RATIO*1 | 85 % | |
|
CONTRAST Ratio*1 |
3,000,000:1 (Full On/Full Off) (When [PICTURE MODE] is set to [DYNAMIC] and [DYNAMIC CONTRAST] is set to [1] or [2]. HDMI signal input) |
|
|
Screen size (diagonal) |
1.02–10.16 m (40–400 in), 1.52–10.16 m (60–400 in) with the ET-ELW22, 2.54–10.16 m (100–400 in) with the ET-ELU20, 16:10 aspect ratio |
|
|
Lens Shift |
|
|
| Vertical(From the origin point of the lens mounter) | ±67 % (powered) (for supplied lens; optional lenses also available*4) | |
| Horizontal(From the origin point of the lens mounter) | ±35 % (powered) (for supplied lens; optional lenses also available*4) | |
| Keystone correction range | Vertical: ±25 °, Horizontal: ±30 ° (for supplied lens; optional lenses also available*4) | |
| Installation | Ceiling/floor, front/rear, free 360-degree installation | |
| Operating noise*1 | 34 dB (NORMAL/ECO), 27 dB (QUIET) | |
| Filter | Included (Estimated maintenance time: approx. 20,000 hours) | |
| Cabinet Materials | Molded plastic | |
| Dimensions (W x H x D) | 561 x 190 x 437 mm (22 3/32˝ x 7 15/32˝ x 17 7/32˝ ) (not including lens or protruding parts) | |
| Operating Environment | Operating temperature: 0 °C- 45 °C (32 °F -113 °F)*7, operating humidity: 20 %-80 % (no condensation) | |
| Applicable software/application | Logo Transfer Software, Multi Monitoring & Control Software, Early Warning Software, Smart Projector Control for iOS/Android™, Geometry Manager Pro*10 | |
| Terminals | ||
| HDMI In | HDMI 19-pin x 3 (Compatible with HDCP 2.3, Deep Color, 4K/60p*5 signal input), CEC supported | |
| Computer In | D-sub HD 15-pin (female) x 1 (RGB/YPBPR/YCBCR) | |
| Serial / Multi Sync In | D-sub 9-pin (female) x 1 for external control/link control (RS-232C compliant) | |
| Multi Sync Out | D-sub 9-pin (male) x 1 for link control | |
| Monitor Out | D-sub HD 15-pin (female) x 1: RGB/YPBPR/YCBCR | |
| Audio In | M3 stereo mini jack x 1 | |
| Audio Out | M3 stereo mini-jack x 1 | |
| REMOTE 1 IN | M3 stereo mini-jack x 1 for wired remote control | |
| Remote 2 In | D-sub 9-pin (female) x 1 for external control (parallel) | |
| LAN | RJ-45 x 1 for network connection, 10Base-T, 100Base-TX (Compatible with PJLink™ [Class 2], Art-Net) | |
| DIGITAL LINK | RJ-45 x 1 for network and DIGITAL LINK connection (video/network/serial control) (HDBaseT™ compliant), 100Base-TX (Compatible with PJLink™ [Class 2], Art-Net, HDCP 2.3, Deep Color,4K/60p*5 *6 signal input) | |
| DC Out | USB Connector (Type A) x 1 (Output 5 V/2 A) | |
Share
