Panasonic PT-RCQ80LBE 2715x1697 8000 Lumens 20000 Hrs 1-Chip Laser Projector w/o Lens Black

Panasonic PT-RCQ80LBE 2715x1697 8000 Lumens 20000 Hrs 1-Chip Laser Projector w/o Lens Black

  • ₱790,000.00
    Unit price per 
Shipping calculated at checkout.


Projector type

1-Chip DLP Laser

Power

AC 100–240 V, 50/60 Hz

Power consumption*1

880 W

Lens

Optional powered zoom/focus lenses

Resolution

4,608,000 pixels / 2715 x 1697 dots
* With Smooth Pixel Drive: ON.

Center-to-Corner Uniformity*3

90%

DLP™ Chip

 

Panel Size

17.0 mm (0.67 in) diagonal, 16:10 aspect ratio

Display Method

DLP™ chip x 1, DLP™ system

 Pixels

2,304,000 (1920 x 1200) pixels

CONTRAST

10,000:1 (Full On/Full Off) * With [Dynamic Contrast] set to [3].

Screen size (diagonal)

1.27–15.24 m (50–600 in), 1.27–5.08 m (50–200 in) with ET-DLE055, 2.54–8.89 m (100–350 in) with ET-DLE035, 16:10 aspect ratio

Lens Shift


 Vertical

+50 %, -16 % (+40%, -16% with ET-DLE060) (powered)

 Horizontal

+30 %, -10 % (+19%, -10% with ET-DLE060 / +28 %, -10 % with ET-DLE085/ET-DLE105 ) (powered)

Keystone correction range

Vertical: ±40 ° (±5 ° with ET-DLE020, ±16 ° with ET-DLE060, ±22 ° with ET-DLE105/ET-DLE085/ET-DLE055, +5 ° with ET-DLE035),
Horizontal: ±15 ° (±10 ° with ET-DLE060) (cannot be operated with ET-DLE035/ET-DLE020)
Installation Ceiling/floor, front/rear, free 360-degree installation
Operating noise*1 40 dB (Normal)/38 dB (Quiet)
Light source Laser diode
Light Output 8,000 lm*1 / 8,400 lm (Center)*2
Time until light output declines to 50 %*3 20,000 hours (NORMAL)/24,000 hours (ECO)
Cabinet Materials Molded plastic
Dimensions (WxHxD) 498 x 200*6 x 538 mm (19 19/32˝ x 7 7/8˝ *6 x 21 3/16˝ ) (without lens)
Operating Environment Operating temperature: 0 °C- 45 °C (32 °F -113 °F)*7, operating humidity: 20 %-80 % (no condensation)
Applicable software Logo Transfer Software, Multi Monitoring & Control Software, Early Warning Software, Geometry Manager Pro (ET-UK20 Upgrade Kit, ET-CUK10 Auto Screen Adjustment Kit), Smart Projector Control for iOS/Android™
Terminal
SDI IN BNC x 1: 3G/HD-SDI input
HDMI In HDMI 19-pin x 1 (Compatible with HDCP 2.2, Deep Color, 4K signal input)
DVI-D In DVI-D 24-pin x 1 (DVI 1.0 compliant, compatible with HDCP, compatible with single link only)
MULTI PROJECTOR SYNC IN BNC x 1
MULTI PROJECTOR SYNC OUT BNC x 1
Serial In D-sub 9-pin (female) x 1 for external control (RS-232C compliant)
Serial Out D-sub 9-pin (male) x 1 for link control
Remoter 1 In M3 jack x 1 for wired remote control
Remoter 1 Out M3 jack x 1 for link control (for wired remote control)
Remoter 2 In D-sub 9-pin (female) x1 for external control (parallel)
LAN RJ-45 x 1 for network connection, 10Base-T, 100Base-TX (Compatible with PJLink™ [Class 2], Art-Net)
DIGITAL LINK RJ-45 x 1 for network and DIGITAL LINK connection (HDBaseT™ compliant), 100Base-TX (Compatible with PJLink™ [Class 2], Art-Net, HDCP 2.2, Deep Color, 4K signal input)
USB USB Connector (Type A) x 1 for Cloning/Wireless Module (output 5 V/500 mA)
Expansion Slot Open slot for SLOT NX compatible interface board

We Also Recommend